Introduction

In this article, we will guide you through the process of installing TWRP (Team Win Recovery Project) on your Moto G4 or Moto G4 Plus. TWRP is a custom recovery that allows you to perform various tasks on your device, such as installing custom ROMs, creating backups, and rooting your device. Follow the step-by-step instructions below to successfully install TWRP on your Moto G4.

Prerequisites

Before we begin, make sure you have the following:

  1. ADB and Fastboot installed: We recommend using Minimal ADB and Fastboot from XDA, which you can download from the provided link in the description of the full tutorial.
  2. TWRP image: Download the specific TWRP image for your Moto G4 or Moto G4 Plus and rename it to “TWRP.img”. Move this image to the same directory where your ADB and Fastboot executables are located.

Step 1: Enable Developer Mode

To enable Developer Mode on your Moto G4, follow these steps:

  1. Go to “Settings” on your device.
  2. Scroll down and tap on “About phone”.
  3. Tap on “Build number” multiple times until you see a prompt saying “You are now a developer!”.

Step 2: Enable USB Debugging

Once you have enabled Developer Mode, follow these steps to enable USB debugging:

  1. Go back to “Settings”.
  2. Scroll down and tap on “Developer options”.
  3. Toggle on the “USB debugging” option.

Step 3: Launch Minimal ADB and Fastboot

Now, double-click on the Minimal ADB and Fastboot shortcut that was created when you installed the program. This will open a command prompt window with the ADB and Fastboot executables.

Step 4: Check Device Connection

In the command prompt window, type the following command and press Enter:

adb devices

If your device is connected properly, you will see a message stating that the daemon has been started successfully. Connect your Moto G4 to your PC using a USB cable.

Step 5: Boot into Fastboot Mode

To boot your Moto G4 into Fastboot mode, follow these steps:

  1. Power off your device.
  2. Press and hold the Power and Volume Down buttons simultaneously until you see the Fastboot mode screen.

Step 6: Flash TWRP Recovery

In the command prompt window, enter the following command and press Enter:

fastboot flash recovery TWRP.img

This command will write the TWRP image to the recovery partition on your Moto G4.

Step 7: Enter Recovery Mode

After flashing the TWRP image, use the Volume Down button to highlight the “Recovery mode” option on the Fastboot mode screen. Press the Power button to select it. Your Moto G4 will now reboot into TWRP recovery.

Step 8: Customize TWRP Settings

In the TWRP main menu, you have the option to customize various settings. Here are a few key features:

  1. Installing SuperSU: You can use TWRP to flash SuperSU, which enables root access on your device.
  2. Creating a Backup: It is highly recommended to create a backup of your current Android installation before making any changes.
  3. Rebooting into Android: You can reboot your device back into Android directly from TWRP.

Conclusion

Congratulations! You have successfully installed TWRP on your Moto G4 or Moto G4 Plus. With TWRP, you now have the ability to perform advanced tasks on your device, giving you more control and customization options. Remember to always proceed with caution and follow the instructions carefully to avoid any issues.

Have fun exploring the possibilities that TWRP offers with your Moto G4!

Note: “Moto G4” and “TWRP” are the main keywords in this article.